Sweden

Sölvesborg

This is where the company was founded in 1994, and it’s still home to casting, machining and the metrology lab. It’s also the place to call when you want to start a project.

An employee wearing ear defenders stands in front of a large die-casting machine.
Production area
5,000 m²
Employees
~50
In operation since
1994
Focus
Casting & machining

Our plant on Tredenborgsvägen houses the heavy end of the chain: six robot-served die-casting cells, twelve CNC machines and the metrology lab. Around 50 people work here.

Casting and machining are side by side here, so the fixture is designed at the same time as the die. When a dimension needs adjusting, the caster and the machinist can sort it out together on the shop floor.

With the metrology lab in the same building, we can investigate an out-of-tolerance dimension here, without sending the part anywhere.

What we do in Sölvesborg

  • Die casting in six robot-served cells, 320–1,850 tonnes
  • CNC machining on twelve machines
  • Turning with live tooling
  • Inspection on CMMs running PC-DMIS
  • Blasting, tumbling and vibratory deburring
  • Assembly and packing
Close-up of an industrial robot's gripper above castings on a wire mesh in a dimly lit casting cell.
Die-casting machine with its die area open and vapour rising from it. An industrial robot in front of the machine reaches into the open die. The casting cell is enclosed by safety fencing.
Measuring probe with a star stylus checking the edge of a hole in a bright, machined aluminium part.

Machine list

Equipment at a glance

Die-casting cells
6, robot-served
Locking force
320 / 450 / 650 / 700 / 1,100 / 1,850 tonnes
CNC machines
12, machining and turning centres
Turning
Haas ST-30Y, Puma 240MC
CMMs
Hexagon Global S 9.15.8 Green, CE Johansson Cordimatic 6000

Contact

Contacts in Sölvesborg

Sweden

Sölvesborg

Visitor address
Tredenborgsvägen 20
SE-294 35 Sölvesborg
Office hours
Mon–Fri 07:00–16:00 (CET/CEST)
Show on map

Contact us

We start with your drawing

Send it over, ideally before the design is frozen. That way we can suggest changes while they’re still cheap to make.

We accept STEP, IGES and 2D drawings, and we’re happy to sign an NDA before you send anything.