Poland

Wejherowo

Our Wejherowo plant opened in 2004. This is where parts go through chromate conversion and powder coating, and where sub-assemblies are built before delivery.

Aluminium parts in a rack being lifted over the tanks on the chromate conversion line.
Production area
3,000 m²
Employees
~50
In operation since
2004
Focus
Finishing & assembly

Around 50 people work in the 3,000 m² plant, handling manual fettling, chromate conversion coating, powder coating and assembly.

The chromate conversion and powder coating lines were installed in 2020, when the plant was extended. Because they’re ours, we can set up the process for an individual part and make sample parts before series production starts.

The plant also has blasting, tumbling and ball burnishing, plus equipment for balancing parts that run at high speeds.

What we do in Wejherowo

  • Chromate conversion coating on our own line
  • Powder coating on our own line
  • Screen printing and marking
  • Blasting, tumbling and ball burnishing
  • Balancing of high-speed parts
  • Manual fettling and sub-assembly
An employee wearing a face mask and red work gloves holding an aluminium fan wheel at the balancing machine, with the measurement result on the screen beside it.
The balancing machine's screen showing where the imbalance is: 0.7169 grams at 254.9 degrees.
Row of white-coated housings with holes and cut-outs hanging on wire hooks from a bar in the workshop.

Machine list

Equipment at a glance

Chemical
Chromate conversion coating line
Coating
Powder coating with curing oven
Mechanical
Blasting, tumbling, ball burnishing
Fettling
Vibratory and manual deburring
Other
Balancing, screen printing, packing

Contact

Contacts in Wejherowo

Poland

Wejherowo

Visitor address
Tartaczna 14
84-200 Wejherowo
Show on map

Call us in Sölvesborg and we’ll put you through to the right person in Wejherowo.

Contact us

We start with your drawing

Send it over, ideally before the design is frozen. That way we can suggest changes while they’re still cheap to make.

We accept STEP, IGES and 2D drawings, and we’re happy to sign an NDA before you send anything.